Lucent Technologies 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing data calls
418
PC Interface
15
Figure 12.
DCP PC interface configuration (Group 1)
The group 2 configurations link to the switch using a PC/ISDN Interface card
installed in the PC. This group can include a stand-alone PC terminal, or up to 4
telephones, handsets, or headsets. Group 2 (shown in
installed in the PC. This group can include a stand-alone PC terminal, or up to 4
telephones, handsets, or headsets. Group 2 (shown in
Figure 13
) uses PC/ISDN
Interface cards (up to four cards) which plug into expansion slots on the PC. These
cards each provide 2 standard 8-pin modular-jack connections for both line
connections (to the switch) and phone connections. A standard 4-pin modular jack
is also available for use with a handset or headset.
cards each provide 2 standard 8-pin modular-jack connections for both line
connections (to the switch) and phone connections. A standard 4-pin modular jack
is also available for use with a handset or headset.
Figure Notes
1. IBM-compatible PC with DCP
Interface card
2. IBM-compatible PC with DCP
Interface card
3. DCP
4. DCP telephone
5. DEFINITY ECS (Digital Line,
Digital Line (16-DCP-2-Wire), or
Digital Line (24-DCP-2-wire)
circuit pack)
Digital Line (24-DCP-2-wire)
circuit pack)
6. Host