Lucent Technologies 8.2 User Manual

Page of 1707
DEFINITY ECS Release 8.2
Administrator’s Guide  
555-233-506  
Issue 1
April 2000
Screen reference 
511
CDR System Parameters 
17
Secondary Output Format
Controls the format of the call records sent to the secondary output device. 
!
CAUTION:
Only qualified (Lucent Technologies) service personnel should administer a 
secondary output device. This option may cause loss of data when the buffer 
contains large amounts of data.
Secondary Output Extension
Appears when the secondary output format is administered.
Use ISDN Layouts
ISDN Layouts provide more accurate information about the inter-exchange carrier 
and ISDN network services used for a call. This affects "lsu" and "printer" output 
formats, as well as any format with ISDN layouts, such as “teleseer.” 
Valid entries
Usage
lsu
unformatted
int-direct
int-process
These are the only formats you can use for a secondary output 
device. The format must be compatible with your call 
accounting software. Verify this through your vendor or the 
accounting system documentation. 
Valid entries
Usage
eia
Use this if the secondary output device is connected to the 
eia port. This is not a valid option on G3r systems. 
Extension number 
This is the extension of the data module (if used) that links 
the secondary output device to the switch. 
Valid entries
Usage
y/n
Enter 
y
 to enable the use of the ISDN version of the specified 
primary output format. You cannot use ISDN formats and 
Enhanced formats at the same time.