Lucent Technologies 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
667
Feature-Related System Parameters
17
Misoperation Alerting
Misoperation Alerting should not be enabled if Call Prompting is optioned.
Repetitive Call Waiting Tone
Allow Conference via Flash
Repetitive Call Waiting Interval (sec)
Vector Disconnect Timer (min)
Enter the number of minutes, or blank that a trunk should remain connected to a
vector.
vector.
Valid entries
Usage
y
Enter
y
for misoperation recall alerting on multi-appearance
stations, analog stations, and attendant consoles.
n
Enter
n
for standard misoperation handling without recall
alerting.
Valid entries
Usage
y/n
Enter
y
to indicate that a repetitive call waiting tone be provided
to the called party for all types of call waiting access.
Valid entries
Usage
y
Enter
y
to allow an analog station to use flash to conference
calls together.
n
Enter
n
to prevent this.
Valid entries
Usage
1
to
99
in
increments of 1
Enter a number to specify the number of seconds between call
waiting tones. This field appears when the Repetitive Call
Waiting Tone is
waiting tones. This field appears when the Repetitive Call
Waiting Tone is
y
.
Valid entries
Usage
1
to
240
The number of minutes that you enter determines when the
trunk will be disconnected if the Disconnect Supervision-In or
Disconnect Supervision-Out fields on the Trunk screen are
trunk will be disconnected if the Disconnect Supervision-In or
Disconnect Supervision-Out fields on the Trunk screen are
n
.
blank
Enter blank if you do not want DEFINITY ECS to initiate a
disconnect.
disconnect.