Lucent Technologies 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
759
ISDN trunk group
17
Send Calling Number
Specifies whether the calling party’s number is sent on outgoing or tandemed
ISDN calls. Valid entries are
ISDN calls. Valid entries are
y
,
n
, or
r
(restricted). If
y
is entered, the ISDN
Numbering - Public/Unknown Format screen is accessed to construct the actual
number to be sent, or the ISDN Numbering-Private screen (based on the
Numbering Format field) is used. If the value is
number to be sent, or the ISDN Numbering-Private screen (based on the
Numbering Format field) is used. If the value is
r
, the calling number is sent
“presentation restricted.”
NOTE:
The ISDN Numbering - Public/Unknown Format screen can override the
Send Calling Number field entry for any administrable block of extensions.
Send Calling Number field entry for any administrable block of extensions.
Send Codeset 6/7 LAI IE?
Specifies whether the ISDN trunk should transmit information in Codeset 6/7. If
the UUI IE Treatment field is shared, then this field should be
the UUI IE Treatment field is shared, then this field should be
n
. Otherwise, the
same information will be sent twice and may exceed the message size. Default is
y
for pre-DEFINITY 6.3 compatibility.
Send Connected Number
Appears if the QSIG Value-Added Lucent field on the Trunk Group screen is
n
.
Specifies if the connected party’s number is sent on incoming or tandemed ISDN
calls. Valid entries are
calls. Valid entries are
y
,
n
, or
r
(restricted). If
y
is entered, the ISDN Numbering -
Public/Unknown Format screen is accessed to construct the actual number sent, or
the ISDN Numbering-Private screen (based on the Numbering Format field) is
used. If the value is
the ISDN Numbering-Private screen (based on the Numbering Format field) is
used. If the value is
r
, the connected number is sent “presentation restricted.”
NOTE:
The AT&T Switched Network Protocol does not support restricted displays
of connected numbers. Therefore, if you administer the 1a
country-protocol/protocol-version combination on the DS1 screen, you
should not administer the Send Connected Number field to
of connected numbers. Therefore, if you administer the 1a
country-protocol/protocol-version combination on the DS1 screen, you
should not administer the Send Connected Number field to
r
(restricted) on
the ISDN Trunk Group screen, as this causes display problems.
NOTE:
The ISDN Numbering - Public/Unknown Format screen overrides the Send
Connected Number field entry for any administrable block of extensions.
Connected Number field entry for any administrable block of extensions.
Send Name
Specifies whether the calling/connected/called/busy party’s administered name is
sent to the network on outgoing/incoming calls. Valid entries are
sent to the network on outgoing/incoming calls. Valid entries are
y
,
n
, or
r
(restricted). The value
r
indicates that the calling/connected name will be sent by
the switch but will be marked “presentation restricted.” This value is valid only if
the Supplementary Services Protocol field is
the Supplementary Services Protocol field is
a
(national supplementary service),
b