Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Screen reference 

823

Multifrequency-Signaling-Related System Parameters 

This screen sets the system parameters associated with multifrequency signaling. 

Screen 164 on page 823

 appears when Incoming Call Type is 

 and 

Outgoing Call Type is 

. 

Screen 165 on page 831

 appears when both 

Incoming Call Type and Outgoing Call Type are 

.

The ANI Prefix, ANI for PBX, and Collect All Digits Before Seizure fields appear 
only when the value of the Outgoing Call Type field is 

 or 

.

If Collect All Digits Before Seizure is 

, Overlap Sending on Link-to-Link 

Tandem Calls and Convert First Digit End-of-ANI are not displayed.

change system-parameters multifrequency-signaling

 Page  1 of  4

             MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS

          Incoming Call Type: 

           ANI Prefix:

          Outgoing Call Type: 

          ANI for PBX:

       Maintenance Call Type: 

       NEXT ANI DIGIT

         Test Call Extension:                          Incoming: 
      Interdigit Timer (sec): 

                       Outgoing: 

     Maximum Resend Requests: _

Received Signal Gain (dB): _

Transmitted Signal Gain (dB): -
                           Request Incoming ANI (non-AAR/ARS)? 
                    Outgoing Forward Signal Present Timer (sec): 
                     Outgoing Forward Signal Absent Timer (sec): 
          Multifrequency Signaling Incoming Intercept Treatment? 
                              Collect All Digits Before Seizure? 
                   Overlap Sending on Link-to-Link Tandem Calls? 
           Private Group II Permissions and Public Interworking? 

Convert First Digit End-of-ANI To: _ 

                                 Group II Called Party Category: 
                             Use COR for Calling Party Category? 

Outgoing Shuttle Exchange Cycle Timer (sec):