Lucent Technologies 8.2 User Manual

Page of 1707
DEFINITY ECS Release 8.2
Administrator’s Guide  
555-233-506  
Issue 1
April 2000
Screen reference 
865
Route Pattern 
17
RHNPA TABLE
CODE
Enter the desired 100-block, for example 000 through 099 or 900 through 999. A 
separate screen is required for each 100-block.
Pattern Choices
Code-Pattern Choice Assignments
Route Pattern
The Route Pattern screen defines the route patterns used by your switch. Each 
route pattern contains a list of trunk groups that can be used to route the call. The 
maximum number of route patterns and trunk groups allowed depends on the 
configuration and memory available in your system.
Use this screen to insert or delete digits so AAR or ARS calls route over different 
trunk groups. You can convert an AAR number into an international number, and 
insert an area code in an AAR number to convert an on-network number to a 
public network number. Also, when a call directly accesses a local central office 
(CO), if the long-distance carrier provided by your CO is not available, your 
switch can insert the dial access code for an alternative carrier into the digit string.
Valid entries
Usage
1
 to 
32
Enter the table number. You can use up to 8 screens for each 
table, one screen for each 100 numbers.
Valid entries Usage
Enter the route pattern number you want associated with each 
code. The pattern choice you list on one screen automatically 
defaults to the other screens of the same table. If you use one 
pattern for most of the codes, assign that pattern to choice 1. 
Valid entries
Usage
1
 through 
12
Enter a Pattern Choice number from the list above to choose 
the route pattern for each prefix code.