Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Screen reference 

928

System Parameters Customer-Options 

There is one dynamic Duration field associated with each of the 15 Tone 
(Frequency/Level) fields on each screen page. Initially, when Tone is blank, this 
field does not appear. However, when a non-blank value other than 

 is entered 

in a Tone field, the associated Duration field appears, and must be used to specify 
the duration (in milliseconds) of the specified tone.

There is one dynamic Step field associated with each of the 15 Tone 
(Frequency/Level) fields shown on a screen page. Initially, when Tone is blank, 
this field does not appear. However, when 

 is entered in a Tone field, the 

associated Step field appears, and must be used to specify the cadence step to 
begin repeating from

This screen allows access to features purchased by customers. An authorized 
Lucent Technologies representative sets these parameters for you.

 through 

 in 

increments of 50

To describe the duration of each administered tone.

Cadence Step (

–

) 

Beginning the repeated sequence for a “

” entry.

 

Page   1 of   5

OPTIONAL FEATURES

                  G3 Version: V6

 Maximum Ports:  300

Abbreviated Dialing Enhanced List? n

CAS Main? n

 Access Security Gateway? n Cvg Of Calls Redirected Off-net? n

Analog Trunk Incoming Call ID? n

 DCS (Basic)? n

 A/D Grp/Sys List Dialing Start at 01? n

 DCS Call Coverage? n

Answer Supervision by Call Classifier? n

DCS with Rerouting? n

                                  ARS? y

DEFINITY Network Admin? n

ARS/AAR Partitioning? y

 DS1 MSP? n

   

ASAI Interface? n

ASAI Proprietary Adjunct Links? n

Emergency Access to Attendant? y

 

Page   1 of   5

OPTIONAL FEATURES

                  G3 Version: V8

 Maximum Ports: 100 

Location: 1 

Maximum XMOBILE Stations: 0

Maximum H.323 Trunks: 0

Maximum H.323 Stations: 0

Maximum IP SoftPhones: 0