Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Screen reference 

933

System Parameters Customer-Options 

locations (main and branch). Each branch location switches all of its incoming 
calls to the centralized attendant positions over release link trunks (RLTs). The 
calls are then extended back to the requested extension at the branch switch over 
the same RLT. When the call is answered, the trunks to the main switch are 
dropped and can be used for another call.

Provides certain users the ability to change the class of restriction of local 
extensions and local attendants via a phone by using a feature access code (FAC).

Provides continued monitoring for calls redirected to off-network (remote) 
coverage points. Uses call classification via call classifier circuit pack or ISDN 
trunk signaling. 

Provides transparent operation of selected features across a Distributed 
Communications System (DCS). Users on one switch can use features located on 
another switch. Includes 4- and 5-digit uniform dialing and 1–4 digit steering.

Provides DCS-based transparency of the call coverage feature across a DCS 
network of switches.

Provides for rerouting calls transferred among DCS nodes, enabling rerouting of 
the call for more effective use of facilities.

Indicates the switch is accessible by DEFINITY Network Administration.

To invoke DCS with Rerouting

To set value to 

, enable ISDN-PRI (on page 2) and DCS 

(Basic).