Lucent Technologies Release 7 User Manual
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-51
change fiber-link
8
change fiber-link
change fiber-link fiber#
The change fiber-link command changes the translation data associated with
an existing fiber link. On critical reliability systems (duplicated PNC), each fiber
link is duplicated and exists as a pair. When PNC duplication is enabled, only the
fields on pages 2 and 3 (the DS1 CONV complex attributes) can be changed.
an existing fiber link. On critical reliability systems (duplicated PNC), each fiber
link is duplicated and exists as a pair. When PNC duplication is enabled, only the
fields on pages 2 and 3 (the DS1 CONV complex attributes) can be changed.
Translation data is not changed until the
Enter
key is pressed. Pressing
CANCEL
any time before pressing
Enter
to enter the changes returns you to the command
line without changing any translation data.
When you enter a command that changes translation data, two checks are made:
■
You must have permission to administer the feature.
■
No other user may be executing a change, add, or remove fiber-link
command.
command.
On a simplex PNC or fully operational duplex PNC, you must remove a fiber and
add it again to change the endpoint board locations.
add it again to change the endpoint board locations.
Parameters
Examples
change fiber-link 21
number
The administered number (1-27) associated with a fiber link or, on a
duplicated PNC, with a fiber link pair.
duplicated PNC, with a fiber link pair.