Lucent Technologies Release 7 User Manual

Issue 4

June 1999

Maintenance Commands 

8-118

enable synchronization-switch 

Enter board or port location,

[‘off-board-only’], expires-in-hrs(1-72)

The command returns one of the following messages:

1. If the time-out duration is not between one and 72:

XX is an invalid identifier; please press HELP

2. If the port or board specifier is not valid:

Port/Board invalid

3. If the Suspend Alarm Origination table is full:

Table full; cannot enable a new entry

None.

This command returns control of the selection of synchronization source to the 
maintenance subsystem and tone-clock after being previously turned off by the 
disable synch command. See “SYNCH” in Chapter 9 for details.

board or port 

location

This parameter specifies the physical location of the hardware 
component for suspending Alarm Origination.

off-board-only

This option enables Suspend Alarm Origination for off-board 
alarms only.

expires-in-hrs

This parameter specifies the time-out duration for a Suspend 
Alarm Origination entry. Expired entries are removed 
automatically.