Lucent Technologies Release 7 User Manual

Issue 4

June 1999

Maintenance Commands 

8-121

get vector 

None

This command displays the triggering conditions and the SPE associated with a 
core dump of memory to the tape or disk device. The vector is a set of system 
reset levels which will cause the contents of memory to be saved on tape. When 
the core dump occurs, the vector settings are cleared. The vector is set with the 
set vector command (not available to craft logins). If no core dump has taken 
place since the vector was set, the settings are displayed. If a core dump has 
taken place, the time and location of the core dump files is displayed.

When a system reset of a level that is set to trigger a core dump takes 
place, the vector is cleared regardless of whether the core dump is 
successful.

Enter ’translation’ or ’announcements’ or ’coredump’ or ’firmware’
  ’translation’ option includes translation only
’announcements’ option includes translation and announcments
       ’core-dump’ option includes translation, announcments, and code-dump
        ’firmware’ option includes translation, announcements, and firmware
Or press CANCEL to cancel the command

-------------------------------------------------------------------------------
Identifier command word(s) omitted; please press HELP PREV-FIELD to edit
-------------------------------------------------------------------------------
Command: format card-mem <Help>

Command: