Lucent Technologies Release 7 User Manual

DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r

555-230-126

Issue 4

June 1999

Maintenance Commands

8-153

mark port

The following display shows a typical result when list sys-link is entered on a
system with 5 PNs and PNC duplication.

mark port

mark port UUCSSpp

The mark port command will identify a port as unusable by normal call
processing. The port will be able to be tested, etc. but calls will not be attempted
through the port. The marking of a port is saved as part of translation. The port
can be restored to service by using the clear port command.

For more information see

‘‘Common Input Parameters’’

and

‘‘Common Output

Fields’’

at the beginning of this chapter.

monitor bcms

monitor bcms split split# | system system# | skill skill#

The monitor bcms command displays output for agents and splits summarizing
the Basic Call Management System (BCMS) condition. This on-line status report
is automatically updated every 30 seconds or on demand by pressing

UPDATE

The command is canceled by pressing

CANCEL

which results in termination of the

list sys-link Page 1 SPE A

SYSTEM LINKS INFORMATION

Location Link Type/ State Current Faulted Last Fault
Channel Path Path Recorded

02A0101 EAL up present present 12/30/1991 14:18
02B0201 EAL up present none
03A0101 EAL up present present 12/30/1991 12:56
03B0201 EAL up present none
04A0101 EAL up present present 12/30/1991 14:18
04B0201 EAL up present none
05A0101 EAL up present present 12/30/1991 12:56
05B0201 EAL up present none
01E0201 LNL up present none
01D0201 LNL up present none
01E2001 RNL up present none
02E0201 RNL up present present 12/30/1991 14:18
02E0301 RNL up present present 12/30/1991 14:18
02E2001 RNL up present none

press CANCEL to quit -- press NEXT PAGE to continue