Lucent Technologies Release 7 User Manual
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-290
status pms-link
8
status pms-link
status pms-link [print]
The status pms-link command displays the status of the property management
system interface link. If the link is up, whether or not a data base swap is taking
place between the switch and PMS, will be shown. If the link is down, the number
of times the switch has tried to set up the link will be shown.
system interface link. If the link is up, whether or not a data base swap is taking
place between the switch and PMS, will be shown. If the link is down, the number
of times the switch has tried to set up the link will be shown.
A property management system (PMS) is a stand alone computer system which
can be integrated with the switch to enhance the service capability for a
hotel/motel.
can be integrated with the switch to enhance the service capability for a
hotel/motel.
Output
The following display shows a typical result when status pms-link is entered.
status pnc
status pnc [print]
The status pnc command displays a summary of conditions on the active and
standby Port Network Connectivities. If the PNC is not duplicated, the screen
displays blanks in the PNC-B and other duplication-related fields.
standby Port Network Connectivities. If the PNC is not duplicated, the screen
displays blanks in the PNC-B and other duplication-related fields.
Physical
Link State
Up, down, or extension not administered will be displayed. The PMS
link is considered administered only if an extension is given in the
system hospitality form.
link is considered administered only if an extension is given in the
system hospitality form.
Protocol
State
Maintenance
Busy
Whether there is any maintenance testing being performed upon the
link.
link.
status pms-link
PMS LINK STATUS
Physical Link State: extension not administered
Protocol State:
Maintenance Busy?