Lucent Technologies Release 7 User Manual

Issue 4

June 1999

Maintenance Commands 

8-306

status station 

The following display shows a typical result when status sp-link is entered.

The status station command displays internal software state information for 
diagnosis. This command can help locate facilities to which the station is 
communicating.

Link State:

The operational state of the link:

up

 A call is currently set up to the system printer.

down

 The link is administered but a call is not currently set up to the 

printer.

extension not administered

 An extension has not been 

administered for the system printer on the features-related system 
parameters form.

Number of 

Retries:

The number of times the switch has tried to establish the link since a 
request to set it up has been received. This field is displayed only when 
the link is down. The maximum value displayed is 999.

Maintenance

Busy?

Whether maintenance testing is being performed on the system printer 
link. A blank is displayed if the system printer link is not administered.

Type

The type of equipment administered for the extension.

Extension

The extension number specified on the command line.

Port

The location of the port assigned to the station.

Call Park

Whether the station has a call parked.

 
 status sp-link                                            SPE A
   
                       SYSTEM PRINTER LINK STATUS
 
         Link State: down
  Number of Retries: 0
   Maintenance Busy? no