Pelco C2953M-B User Manual
42
C2953M-B (10/09)
SELECTING MANUAL WHITE BALANCE SETTINGS
Figure 28. Manual White Balance Page
NOTE: Manual white balance is recommended only for indoor applications that have a single, unchanging primary light source.
1. Place your mouse pointer over the Imaging tab.
2. Select White Balance from the drop-down menu.
3. Select the Manual mode.
4. Move the sliders to adjust the following settings in Manual mode:
Red Gain: Adjusts the image output in the red range. Move the slider to the right to increase the red level; move the slider to the left to
decrease the red level. As you move the slider, you will see the color change on your monitor. The manual range of adjustment is 0 to 32;
the default setting is 1.
decrease the red level. As you move the slider, you will see the color change on your monitor. The manual range of adjustment is 0 to 32;
the default setting is 1.
Green Gain: Adjusts the image output in the green range. Move the slider to the right to increase the green level; move the slider to the
left to decrease the green level. As you move the slider, you will see the color change on your monitor. The manual range of adjustment is
0 to 32; the default setting is 1.
left to decrease the green level. As you move the slider, you will see the color change on your monitor. The manual range of adjustment is
0 to 32; the default setting is 1.
Blue Gain: Adjusts the image output in the blue range. Move the slider to the right to increase the blue level; move the slider to the left to
decrease the blue level. As you move the slider, you will see the color change on your monitor. The manual range of adjustment is 0 to 32;
the default setting is 1.
decrease the blue level. As you move the slider, you will see the color change on your monitor. The manual range of adjustment is 0 to 32;
the default setting is 1.
5. If required, click the Factory Defaults button to reset the white balance to the factory default setting.