JVC VN-686WPBU User Manual

This page is for setting time.

This page can be used during access using 

AadminB.

● Click [Advanced Settings] to display setting menu.
● Click [Time]. Press the [OK] button to enable the new settings.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the 

entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

A

B

C

D

E

F

Click

A

For setting the SNTP client feature.
When this is set to 

AOnB, the system accesses the specified NTP server at 

regular intervals to acquire the time.
In addition, time will be recorded in the JPEG headers distributed by the 
camera. Discontinuity in JPEG header’s time may occur immediately before 
and after acquiring time from the NTP server.

B

For setting the IP address of the NTP server.

C

For setting the time interval for access to the NTP server.

D

Displays the time on the clock of the camera.
The clock time can be changed by entering an appropriate value. (Second 
value cannot be specified.)
In addition, time will be recorded in the JPEG headers distributed by the 
camera. Discontinuity may occur in the JPEG header’s time immediately 
before and after changing the time.

E

For setting the time zone.

F

Click [Set] to load the clock time of the computer in use on the camera.