Axis Communications 207W User Manual

Status Indicator

Focus Ring

Open a browser and 
examine the image. If 
required, adjust the focus 
ring until the focus is 
satisfactory. 

Small dot above the lens 
assembly. 

Upon delivery, the raised line on the focus ring is aligned with the dot above the lens, and the focus is 
set to infinity.

(outer ring)

(inner ring)

Raised line 
on focus ring.

Depending on whether or not the Live View page has been customized, the buttons 

described below may or may not be visible.

The Video Format drop-down list allows the video format on the Live 

View page to be temporarily changed. 

The 2 different Output buttons 

control the output directly from 

the Live View page. These are 

configured from Setup > Live 

View Config > Layout.

Pulse - click this button to activate the 

output for a defined period of time, e.g. 

to switch on a light for 20 seconds.

Active/Inactive - click these buttons to 

manually start and stop a connected 

device, e.g. switch a light on/off.

The Trigger buttons can trigger an event directly from the Live View page. 

These are configured under Setup > Live View Config > Layout.

The Snapshot button shows a snapshot of the video image currently being 

displayed. Right-click on the video image to save it in JPEG format on your 

computer. This button is primarily intended for use when the AMC viewer 

toolbar is not available.