Intel D410PT, 10 Pack BLKD410PT-10PACK User Manual
Product codes
BLKD410PT-10PACK
proceSSor
processor Support
• Intel® Atom™ processor D410 (single-core / 1.66 GHz /
512 KB L2 cache)
cHipSet
• Intel® NM10 Express Chipset
Graphics
Graphics
• Intel® Graphics Media Accelerator 3150
i/o controller
i/o controller
• Two SATA ports (fully shrouded)
• Two PS/2 ports
• Two Serial headers
uSb 2.0
uSb 2.0
• Four external ports
• Four ports via headers
Audio Solution
Audio Solution
• 2+2-channel Intel® High Definition Audio
2
(with multi-streaming)
• Front-panel mic / headphone header
10/100 Network connection
10/100 Network connection
• Realtek* 10/100 Mb/s Ethernet Controller
System bioS
System bioS
• 8 Mb Flash EEPROM with Intel® Platform Innovation
Framework for EFI Plug and Play, IDE drive
auto-configure
• Advanced configuration and power interface
V2.0b, DMI 2.0, multilingual support
• Serial Peripheral Interface (SPI) Flash
For ordering information, visit www.intel.com
For the most current product information, visit
For the most current product information, visit
http://developer.intel.com/products/desktop/motherboard/
1
System resources and hardware (such as PCI and PCI Express*) require physical memory address locations that can reduce available addressable system memory. This could result in a reduction of as much
as 1 GB or more of physical addressable memory being available to the operating system and applications, depending on the system configuration and operating system.
2
Intel® High Definition Audio requires a system with an appropriate Intel® chipset and a motherboard with an appropriate codec and the necessary drivers installed. System sound quality will vary depending
on actual implementation, controller, codec, drivers, and speakers. For more information about Intel® HD Audio, refer to www.intel.com/design/chipsets/hdaudio.htm
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS
GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS
OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR
INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.
Intel products are not intended for use in medical, life-saving, or life-sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
All products, dates, and figures specified are preliminary based on current expectations, and are subject to change without notice. Availability in different channels may vary.
Actual Intel® Desktop Board may differ from the image shown.
Intel, the Intel logo, Intel Atom, and Intel Atom Inside are trademarks of Intel Corporation in the U.S. and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2009 Intel Corporation. All rights reserved. 1109/KL/MS/PDF 322585-001US
All products, dates, and figures specified are preliminary based on current expectations, and are subject to change without notice. Availability in different channels may vary.
Actual Intel® Desktop Board may differ from the image shown.
Intel, the Intel logo, Intel Atom, and Intel Atom Inside are trademarks of Intel Corporation in the U.S. and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2009 Intel Corporation. All rights reserved. 1109/KL/MS/PDF 322585-001US
Intel® Desktop Board D410PT
+ Intel® Atom™ Processor D410
Technical Specifications
intel® rapid bioS boot
• Optimized POST for fast access to PC from power-on
SYSteM MeMorY
Memory capacity
• Single-channel DDR2 with two connectors for
800 / 667 MHz memory support (4 GB max
1
)
Memory types
• DDR2 800 / 667 SDRAM memory support
• Non-ECC Memory
Memory Voltage
Memory Voltage
• 1.8 V
Wake-up from Network
Wake-up from Network
• Wired for Management (WfM) 2.0 compatible
• Support for system wake-up using an add-in network
interface card with remote wake-up capability
expansion capabilities
expansion capabilities
• One PCI connector
JuMperS ANd froNt-pANeL coNNectorS
Jumpers
• Jumper: yellow
• Header: black
front-panel connectors
front-panel connectors
• Reset, HD LED, Power LEDs, power on/off, aux LED
• USB 2.0 headers
• Audio header
MecHANicAL
board Style
• Mini-ITX / microATX-compatible
• 170mm x 170mm
baseboard power requirements
baseboard power requirements
• ATX12V or SFX12V
eNViroNMeNt
operating temperature
• 0°C to +50°C
Storage temperature
Storage temperature
• -20°C to +70°C
reGuLAtioNS ANd SAfetY StANdArdS
united States and canada
CSA/UL 60950-1, First Edition (Binational Standard)
europe
europe
(Low Voltage Directive 2006/95/EC)
EN 60950-1:2006
international
international
IEC 60950-1:2001, First Edition
eMc regulations (tested in representative chassis)
eMc regulations (tested in representative chassis)
united States
FCC 47 CFR Part 15, Subpart B
canada
canada
ICES-003, Issue-004 Class B
europe
europe
(EMC Directive 2004/108/EC)
EN 55022:2006 and EN 55024:1998
Australia/New Zealand
EN 55022:2006 Class B
Japan
Japan
VCCI V-3/2007.04, V-4/2007.04, Class B
South Korea
South Korea
KN-22:2005 and KN-24:2005
taiwan
taiwan
CNS 13438:2006 Class B
international
international
CISPR 22:2005 +A1:2005 +A2:2006 Class B
environmental compliance
environmental compliance
europe
Europe RoHS (Directive 2002/95/EC)
china
china
China RoHS (MII Order # 39)
Lead-free: The symbol is used to identify
electrical and electronic assemblies and
components in which the lead (Pb) concen-
tration level in any of the raw materials and the end
product is not greater than 0.1% by weight (1000 ppm).
This symbol is also used to indicate conformance
to lead-free requirements and definitions adopted
under the European Union’s Restriction on Hazardous
Substances (RoHS) directive, 2002 / 95 / EC.