Avanti K-600HW User Manual

 

 
Once the engineers access code (9999) has been entered 
from within DAY mode, the Day LED will be extinguished, 

and all 8 Zone LED’s will flash to prompt for the selection 
of the menu setting to be changed. 
The following is a list of configurable menus available 
within the engineers menu. 
• 

Press  1

 

to Set up the Programs. 

• 

Press  2 to Set up Zone Attributes. 

• 

Press  3 to Set up the Exit timer. 

• 

Press  4 to Set up the Entry timer. 

• 

Press  5 to Set up Bell Active time. 

• 

Press  6 to Set up Bell Delay time. 

• 

Press  7 to Set up Access codes. 

• 

Press  8 to Set up the Service Timer. 

• 

Press  9 to Enter the Test Menu. 

• 

Press  0 to Set up the System Flags. 

• 

Press  Z

 

to Exit back to DAY mode. 

• 

Press  * twice within 2 sec’s for Factory Reset. 

• 

Press  

‘

to View the Event Log. 

FACTORY DEFAULTS 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 

Once a change has been made you need to accept or 
abort the changes. Pressing Key A accepts the change 
and returns you to the main engineer menu. Pressing Key 
B aborts the change and returns you to the main 
engineer menu. Within some menus Pressing A or B will 
only return you to the top of that menu and Key Z needs 
to be selected to return to engineers menu (this is 
identified throughout programming guide). 

 

 

Set-up Programs menu is entered from the Engineers 
menu, by pressing Key 1. 

 

When the Set-up Programs menu has been selected, Day, 
PA and Tamper LED’s will flash to prompt the engineer to 
select which of the 3 programs to set up. 

 

Press  A To Set program A.

 

Press  B To Set program B.

 

Press  * To Set program *. 

 

Once the program that needs to be altered has been 
selected, the following status LED’s will light. 

 

DAY LED means Program A Selected.

 

PA LED means Program B Selected.

  

TAMPER LED means Program * Selected.

 

 

Zone Lights 1 to 4 will flash to prompt for a selection of 
keys 1 to 4 to program the relevant program settings. 

 

Press  1 To Set-up Immediate zones.

 

Press  2 To Set-up Timed Zones.

 

Press  3 To Set-up Time Inhibited zones.

 

Press  4 To Set-up the Exit Mode. 

Press  Z To return to Engineer Menu 
 

 

On entering Set-up Immediate Zones, the zones that are 
currently set-up as immediate zones will have their 
respective zone LED’s lit. 

 

Pressing the key number that represents the zone to be 
added or removed from the list of immediate zones will 
toggle whether that zone is an immediate zone or not. 
The zone LED will be lit if it is set as an immediate zone, 
and extinguished if not. 

 

Press A To Accept / B To Abort the changes. 
 
 
 
 

 

On entering Set-up Timed Zones, the zones that are 
currently set-up as timed zones will have their respective 
zone LED’s lit. 

 

Whether a zone is a timed zone or not is carried out in the 
same way as immediate zones, by pressing the key 
number for the zone that needs to be toggled to become 

a timed zone or not. 

 

Press A To Accept / Press B To Abort the changes. 
 

 

On entering Set-up Time Inhibited Zones, the zones that 
are currently set-up as time inhibited zones will have their 
respective zone LED’s lit. 

 

Whether a zone is a time inhibited zone or not is carried 
out in the same way as immediate zones, by pressing the 
key number for the zone that needs to be toggled to 
become a time inhibited zone or not. 

 

Press A To Accept / Press B To Abort the changes. 
 

 

On entering Set-up the Exit mode, zone LED’s 1, 2, 3, or 
NONE will be lit. The function represented by the LED’s is 
as follows: 

 

LED 1 = Timed exit.

 

LED 2 = Final Door set.

 

 

= Immediate/Silent set.

 

 

means this program is disabled. 

 

Press  0 To Select no exit mode.

 

Press  1 To Select Timed exit mode.

 

Press  2 To select Final Door set mode.

 

Press  3 To select Immediate/Silent set mode.

 

Press  Z To return to Engineer Menu. 

 

Press  A To Accept / Press B To Abort the changes. 
 

 
 
 
 
 
 
 
 
 
 

Entry time     30 secs 
Exit time       30 secs 
Bell delay        0 secs 

Bell time       14 mins 
Flags 
Bell follow off 
PTS input = PTS 

Z1: 
Omit enabled 
Double knock disabled 
Normally closed loop 
Zone enabled 
Not a fire zone 
Chime zone 
Not a doorbell 

Program  
Z1     Timed 
Z2     Time inhibited 
Z3-5  Immediate 
Z6-7  not used

 

Exit mode: immediate

 

silent set

Program  
Z1     Timed 
Z2     Time inhibited 
Z 3-7 Immediate 

Exit mode: Timed 

Z2,Z3,Z4,Z5,Z6,Z7: 
Omit enabled 
Double knock disabled 
Normally closed loop 
Zone enabled 
Not a fire zone 
Not a chime zone 

Not a doorbell 

Z8: 
Omit enabled 
Double knock disabled 
Normally open loop 
Zone enabled 
Not a fire zone 

Not a Chime zone 
A Doorbell 
Program 
Not initialised 

1 User code 1  0123 
2 User code 2  not used 
3 User code 3  not used 
4 User code 4  not used 
5 Holiday code not used 
6 Manager code  8888 

7 Engineer code  9999