Husqvarna 455e Rancher User Manual
40 –
English
TECHNICAL DATA
Recommended original and replacement bar and chain combinations
Following is a list of recommended cutting equipment for the Husqvarna chain saw model 455 Rancher. The combinations of power head,
bar and chain have been tested and found to be in accordance with the kickback and vibration requirements of ANSI B 175.1–2000.
bar and chain have been tested and found to be in accordance with the kickback and vibration requirements of ANSI B 175.1–2000.
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the corresponding
maximum nose radius of a solid bar.
maximum nose radius of a solid bar.
The following list is the chain saw manufacturers recommendations. There may be other combinations available, which will also
achieve kickback reduction.
achieve kickback reduction.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list. For guide
bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of sprocket teeth may be
considered to have equivalent kickback energy. A hard nose bar having the same length and nose radius as a sprocket-nose bar
may be considered to have equivalent or less kickback energy than the sprocket-nose bar.
bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of sprocket teeth may be
considered to have equivalent kickback energy. A hard nose bar having the same length and nose radius as a sprocket-nose bar
may be considered to have equivalent or less kickback energy than the sprocket-nose bar.
Bar and chain combinations
Chain saw model Husqvarna 455 Rancher met the kickback performance requirements of ANSI B 175.1-2000 when tested with
the combinations of bars and saw chains listed below. The saw chains Husqvarna H30, H80 and H81 are also classified as a low
kickback saw chain since it met the requirements for low kickback saw chain outlined in ANSI B 175.1-2000. We recommend to
use only the listed combinations of bars and chains for chain saw model Husqvarna 455 Rancher. Other chain saw models may
not meet the kickback requirements when equipped with the listed bar and chain combinations.
the combinations of bars and saw chains listed below. The saw chains Husqvarna H30, H80 and H81 are also classified as a low
kickback saw chain since it met the requirements for low kickback saw chain outlined in ANSI B 175.1-2000. We recommend to
use only the listed combinations of bars and chains for chain saw model Husqvarna 455 Rancher. Other chain saw models may
not meet the kickback requirements when equipped with the listed bar and chain combinations.
Saw chain filing and file gauges
Bar
Chain
Length,
inch
inch
Pitch,
inch
inch
Thickness of drive links,
inch/mm
inch/mm
Max. nose radius
Type
Drive link count
13
0,325
0,050/1,3
10T
Husqvarna H30
56
15
0,325
10T
64
16
0,325
10T
66
18
0,325
10T
72
20
0,325
10T
80
13
0,325
0,058/1,5, 0,050/1,3
10T
Husqvarna H25,
Husqvarna H22
56
15
0,325
10T
64
16
0,325
10T
66
18
0,325
10T
72
20
0,325
12T
80
15
3/8
0,058/1,5, 0,050/1,3
11T
Husqvarna H42,
Husqvarna H46,
Husqvarna H47,
Husqvarna H48,
Husqvarna H80,
Husqvarna H81
Husqvarna H46,
Husqvarna H47,
Husqvarna H48,
Husqvarna H80,
Husqvarna H81
56
16
3/8
11T
60
18
3/8
11T
68
20
3/8
11T
72