Husqvarna 338 XPT California User Manual
English
– 29
MAINTENANCE
Throttle lock
•
Make sure the throttle control is locked at the idle setting
when the throttle lock is released.
when the throttle lock is released.
•
Press the throttle lock and make sure it returns to its
original position when you release it.
original position when you release it.
•
Check that the throttle control and throttle lock move freely
and that the return springs work properly.
and that the return springs work properly.
•
Start the chain saw and apply full throttle. Release the
throttle control and check that the chain stops and
remains stationary. If the chain rotates when the throttle
control is in the idle position you should check the
carburetor idle adjustment.
throttle control and check that the chain stops and
remains stationary. If the chain rotates when the throttle
control is in the idle position you should check the
carburetor idle adjustment.
Chain catcher
Check that the chain catcher is not damaged and is firmly
attached to the body of the chain saw.
attached to the body of the chain saw.
Vibration damping system
Regularly check the vibration damping units for cracks or
deformation.
deformation.
Make sure the vibration damping units are securely attached
to the engine unit and handle unit.
to the engine unit and handle unit.
Stop switch
Start the engine and make sure the engine stops when you
move the stop switch to the stop setting.
move the stop switch to the stop setting.