Oregon 59J Leaflet

• Chisel cutters, factory ground with

• Superior cutting speed (nose-clear, nose-buried,

optimum angles

and boring)

• Smooth, easy cutting, minimal feed force required,

minimizes operator fatigue

• Sharpens with a 7/32” round file

• Easy filing and maintenance

• Depth gauge is ramp-shaped,

• Reduces roughness and kickback energies

and offset

without affecting performance

• Clean-ground gullet

• Maximum chip flow, helps prevent clogs from debris
• No out-of-the-box filing is needed

• Top-plate-angle 

• Easy, consistent sharpening

witness mark

• Lubrilink

™

tie straps 

• Improved chain and bar lubrication
• More oil stays where it’s needed – on the chain
• The volume of oil required is reduced

• Long, high-strength cutter top plate

• Long working life, durable, resists breakage

• Made from patented OCS-01 steel-alloy

• Tougher than the steel on other chains, 20% tougher 

material (U.S. patent no. 5,772,957)

at room temperature, 125% tougher at minus 20° F.

59L F&B      A107035      AB      0301

Safety / ANSI: 58J, 58L, 59J, and 59L are yellow-label chains with kickback-reducing 
features. These chains do not meet the kickback requirements for low-kickback chains.

Recommended Use: Professional use by loggers and forest firefighters who prefer
large saws and .404”-pitch chain.

58J

.404”

.058”

Skip

Chisel

Ramp-shaped

58L

.058”

Standard

Depth Gauges

59J

.063”

Skip

59L

.063”

Standard

These new Oregon

®

.404”-pitch Super Guard

®

chains have been carefully developed to replace two

popular families of chain. Users of our previous 59LG-series and 52-series chains will find it easy to
make the switch. 58J, 58L, 59J, and 59L all feature a fast-working new chisel cutter that delivers
performance superior to its predecessors in all cutting modes. The new cutter is mounted on our
proven unequal-pitch 59 chassis for an unmatched combination of performance and durability. Oregon

®

58/59 Super Guard

®

gives professional timber cutters who use .404”-pitch chains what they want: out-

of-the-box sharpness, high performance, resistance to stretch, and consistency from chain to chain.
These chains feature ramped depth gauges to reduce kickback energies, and are recommended for
cutting clean wood with saws 4.0 cubic inches (65cc) and larger, and with bars 20" (50cm) and longer.