Blue Rhino FC-0024 User Manual
OPERATION
TW120 01/11
Operation Section 4-22
© 2011 Alamo Group Inc.
OPERA
T
ION
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition. All safety
devices should be inspected carefully at least daily for missing or
broken components. Missing, broken, or worn items must be
replaced at once to reduce the possibility of injury or death from
thrown objects, entanglement, or blade contact.
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition. All safety
devices should be inspected carefully at least daily for missing or
broken components. Missing, broken, or worn items must be
replaced at once to reduce the possibility of injury or death from
thrown objects, entanglement, or blade contact.
(SGM-3)
•
Lift Type-Ensure the tailwheel beam position
support bolts are properly installed and
tightened.
support bolts are properly installed and
tightened.
•
Pull and Semi-Mount Type-Ensure that the
tailwheel ratchet or hydraulic cylinder is
installed and retained correctly to provide the
desired cutting height.
tailwheel ratchet or hydraulic cylinder is
installed and retained correctly to provide the
desired cutting height.
•
Inspect all bolts and screws and tighten to the
recommended torque. OPS-R-0039_D
recommended torque. OPS-R-0039_D
•
Ensure the tractor PTO master shield and the
mower slip clutch shield are in place, lowered,
and in good condition.
mower slip clutch shield are in place, lowered,
and in good condition.
•
Ensure the driveline integral shield is in good
condition and rotates freely.
condition and rotates freely.
•
Ensure the driveline slip clutch (if equipped) is
properly adjusted. OPS-R-0039
properly adjusted. OPS-R-0039