Toshiba MAS-2U-XPPRO-R3 User Manual

Installation Instructions

This new platform uses the same programming instructions as the previous 2U MAS system. It also 
shares the same side rail mounting instructions to install the system in a 19-inch rack. This information 
can be found in the latest CIX Installation and Maintenance Manual available on FYI.

There are some minor differences with the front panel connections as well as the instructions for 
installing optional PCI cards in the system. That information can be found in the ensuing pages of this 
document.

This document only covers the basic installation of the new 2U MAS. Installation 
instructions for the optional dual redundant power supply is provided in the Strata CIX 
Installation and Maintenance manual, available on the Toshiba FYI web site.

To install PCI boards into the 2 MAS system please follow these instructions;

1.

Remove the top cover of the 2U MAS. Retaining screws can be found on the top front of the 
cover and on the side of the chassis.

2.

Locate and remove the seven retaining screws, as indicated below.

3.

Carefully remove the card cage from the system.

4.

Remove the blank panels for the card slot(s) that will be populated with PCI boards.

Seven card

Blank panel screws

cage screws