Simplicity 1692353 Leaflet

INSTALLATION

CHIPPER/SHREDDER VACUUM KIT

INSTRUCTIONS

Mfg. Nos. 1692210, 1692231,

WARNING

Turn off the engine, let the rotor come to a
complete stop and disconnect the spark plug
wire before assembling the vacuum kit or
changing attachments.

W A R N I N G

Never remove% adapter from the back of the
machine while the machine is running or the
rotor is turning. The rotor is

just inch-

es away from the adapter iniet. Serious injury

will result if you put your fingers or foot in the
adapter inlet while the rotor is turning!

INSTALLATION

Never operate the machine without the cou

assembly or plug connected to the

arrows (or seams) running along the top of the cou-
pler with those on the adapter. Push fully in and turn

until it snaps into place.

NOTE:

Insert plug (3) into adapter when

attachment is not in use. See Removing the

Vacuum Kit on the

page.

4. Slip the grip (12) onto the handle (11). Putting some

soap on the handle will make the grip slide on easi-

er.

1. Remove the rotor housing cover. Retain the screws.

2. Replace the cover with the adapter

or B) using

the screws removed in step 1 and washers (15).

the coupler (2) onto the end of the hose (4).

Insert the coupler into the adapter

aligning the

5. Connect the handle to the nozzle (6) using the

screw

washers (9) and nut (8).

6. Connect nozzle (6) or leaf tray (5) to the hose,.

7. Securely place hopper lid (14) on hopper.

Ref. Qty. Part No.

Description

1021100

Adapter

1713522

Adapter (European Model)

1023100

Coupler

1025100

Plug

1035100

Hose,

x 4” Dia.

1027100

Leaf Tray

1030100

Nozzle

1024100

Ring

1960294

Nut, Hex, Flange,

1921319

Washer,

6041612

Screw, Phillups Hd.

1 1

1026100

Handle

1028100

Grip, Handle

5001612

Decal, Danger

Hopper Lid (Orange)

Hopper Lid (Gold)

Hopper Lid (Red)

1919326

Lid color depends on which kit you’ve ordered. Only

one lid is packaged per kit.

Figure 1. Kit Parts

FORM 1709566

PRINTED IN U.S.A.