Troy-Bilt 769-06521 P00 User Manual

Insert the upper blower 
tube into the blower outlet 
and turn it clockwise until it 
locks into place.

Install the lower blower tube 
onto the upper blower tube 
and turn it clockwise until it 
locks into place.

Place unit on a level surface. 
Fill fuel tank.

Press primer bulb 10 times, 
or until fuel is visible

Move choke lever to 
Position 1.

DO NOT squeeze throttle 
control.

Pull rope 5 times.

Move choke lever to 
Position 2 .

Pull rope 3-5 times to start 
engine. Squeeze throttle 
control and allow unit to 
warm up for 30-60 seconds.

Continue to squeeze 
throttle. Move choke lever 
to Position 3.

Continue to squeeze 
throttle. Warm unit for an 
additional 60 seconds to 
complete warm-up. Unit 
may be used during this 
time.

Remove all contents from 
the carton.

Place the unit on a level 
surface, remove the oil plug 
from the crankcase, and pour 
the entire bottle of oil into the 
fill hole.

Crouch in starting position.

 •  Flathead Screwdriver