Little Wonder 3/1/2000 User Manual

1.   Open box.  Remove upper handle and cardboard 

insert.

2.   Lay box down with blower housing up.  Use lower 

handle to roll unit out of the box. 

3.   Locate hardware package.

4.   Install upper handle to lower handle with (4) 3/8-16 

x 1-34 carriage bolts and (4) 3/8-16 flanged nylon 

insert nuts from the hardware package.  Tighten the 

nuts securely but not so much as to crush the tube. 

(Figure 1)

5.   Route the throttle cable in front of lower handle 

crossbar.  Install to the left side of the upper handle 

with (2) 10-32 x ½ thread forming screws from the 

hardware package. (Figure 2)

6.  Ensure the center link of the chain is on the center 

tooth of the deflector sprocket before connecting the 

deflector cable.  (Figure 5)