Hearth & Home Technologies FI36M User Manual

  10 

33734 Rev J 

1/11

Lighting Instructions, “M” Series

A.  This appliance has an intermittent pilot. When 

lighting the pilot, follow these instructions 

exactly.

B.  BEFORE LIGHTING smell all around the 

appliance area for gas. Be sure to smell next to 

the floor because some gas is heavier than air 

and will settle to the floor.   

 

 

WHAT TO DO IF YOU SMELL GAS

 

•  Do not try to light any appliance.

 

•  Do not touch any electric switch; do not use 

any phone in your building.

 

•  Immediately call your gas supplier?from a 

neighbor's phone. Follow the gas supplier's 

instructions.

 

•  If you cannot reach your gas supplier, call 

the fire department.

C.  Do not use this appliance if any part has been 

under water. Immediately call a qualified service 

technician to inspect the appliance and to 

replace any part of the control system and any 

gas control which has been under water.

Due to high surface termperatures, keep children, clothing and furniture away.

Keep burner and control compartment clean. See installation and operating instructions accompanying the appliance.

1. 

STOP! Read the safety instruction label.

2. 

Turn wall switch to the "OFF" position.

3. 

Wait five minutes to clear out any gas. If you smell 

gas, STOP! Follow "B" on the safety information 

label. If you don't smell gas, go to next step.

4. 

Locate pilot assembly inside unit.

6. 

If appliance will not operate, follow the instructions "TO 

TURN OFF GAS TO APPLIANCE" and call your service 

technician or gas supplier.

1. 

Turn on/off switch to "OFF".

GAS 

CONTROL 

KNOB

FLAME 

SENSOR

IGNITOR

5. 

To light pilot and main burner, turn wall switch to "ON". 

Do not light by hand.

34006

FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this 

or any other appliance.

PILOT 

BURNER