Weed Eater WE20C Owner's Manual

9

LEVER 
BACKWARD 
TO RAISE 
MOWER

LEVER 
FORWARD 
TO LOWER 
MOWER

Height adjuster lever

TO ATTACH GRASS CATCH ER  
1.   Lift the rear door of the lawn mower 

and place the grass catcher frame side 
hooks onto the door pivot pins.

2.   The grass catcher is secured to the lawn 

mower housing when the rear door is low-
ered onto the grass catch er frame.

 CAUTION:  Do not run your lawn mower 

with out mulcher plug or approved grass 
catch er in place. Never at tempt to op-
 er ate the lawn mower with the rear door 
re moved or propped open.

Pivot pins

Rear door

Grass catcher 

handle

Catcher frame hook

Bag 
handle

Grass 

catcher 

frame 

handle

TO EMPTY GRASS CATCH ER 
1.   Lift up on grass catcher using the frame 

han dle.

2.   Remove grass catcher with clip pings 

from under lawn mower han dle.

3.   Empty clippings from bag.
NOTE:  Do not drag the bag when 
emptying.  It will cause unnecessary wear.

 CAUTION:  Under nor mal usage, the 

catch er material is subject to de te ri o ra tion 
and wear and should, therefore, be 
checked frequently for replacement.  Any 
replacement catcher should be checked 
to ensure compliance with original 
man u fac tur er's spec i fi  ca tions.

TO ADJUST CUTTING HEIGHT 
Adjust cutting height to suit your re quire -
ments.  Me di um position is best for most 
lawns.  Raise wheels for low cut and lower 
wheels for high cut.  All four wheels are 
adjusted by a single lever.
•   Pull adjuster lever toward wheel. To 

lower mower, move lever forward to 
desired position. To raise mow er, move 
the lever toward the rear.