Weed Eater 96022000700 Owner's Manual

20

WARNING:  TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY 
SERVICE OR ADJUSTMENTS:
1.  Depress clutch/brake pedal fully and set parking brake.

2.  Place motion control lever in neutral (N) position.

3.  Place deck clutch in “DISENGAGED” position.

4.  Turn ignition key to “STOP” and remove key.

5.  Make sure the blade and all moving parts have completely stopped.

6.  Disconnect spark plug wire from spark plug and place wire where it cannot 

come in contact with plug.

TO REMOVE MOWER
1.  Place  deck  clutch  in  “DISENGAGED"

position.

2.  Move mower height adjustment lift lever 

forward to lower mower to its lowest 

position.

3.  Remove mandrel cover.

4.  Remove pins holding left and right front 

mower suspension arms in place.

5.  Remove bolt holding deck front to rear 

leveling rod in place.

TO INSTALL MOWER
Install in reverse order following instructions 

in "TO REMOVE MOWER" section.

6.  Remove pin holding deck lift link arm in 

place. 

7.  Remove bolt holding deck side to side 

leveling rod in place.

8.  Remove belt from around pulleys.

9.  Slide deck out from under side of mower.

Deck Leveling 

Side to Side 

Rod Bolt

Mandrel Cover

Deck Lift 

Link Pin

Front Leveling 

Rod Bolt

Mower 

Suspension 

Arm Pin