Weed Eater WE18C User Manual
12
STORAGE
Immediately prepare your lawn mower for storage at the end of the season or if the unit
will not be used for 30 days or more.
will not be used for 30 days or more.
EXTENSION CORD
• Wipe extension cord to remove any
• Wipe extension cord to remove any
foreign substances such as oil or stains.
IMPORTANT: Replace extension cord if
cut or damaged in any way.
• Wind cord in a series of equal loops to
cut or damaged in any way.
• Wind cord in a series of equal loops to
prevent it from tangling.
OTHER
• If possible, store your unit indoors and
cover it to protect it from dust and dirt.
• Cover your unit with a suitable pro tec tive
cover that does not retain mois ture. Do
not use plastic. Plas tic cannot breathe,
which allows con den sa tion to form and
will cause your unit to rust.
not use plastic. Plas tic cannot breathe,
which allows con den sa tion to form and
will cause your unit to rust.
LAWN MOWER
When lawn mower is to be stored for a pe-
riod of time, clean it thor oughly, remove all
dirt, grease, leaves, etc. Store in a clean,
dry area.
• Clean entire lawn mower (See “CLEAN-
riod of time, clean it thor oughly, remove all
dirt, grease, leaves, etc. Store in a clean,
dry area.
• Clean entire lawn mower (See “CLEAN-
ING” in the Maintenance section of this
manual).
manual).
• Lubricate as shown in the Main te nance
section of this manual.
• Be sure that all nuts, bolts, screws, and
pins are securely fas tened. Inspect
moving parts for damage, breakage and
wear. Replace if necessary.
moving parts for damage, breakage and
wear. Replace if necessary.
• Touch up all rusted or chipped paint
surfaces; sand lightly before painting.
HANDLE
You can fold your lawn mower han dle for
storage.
1. Loosen the two cam locks on sides of
You can fold your lawn mower han dle for
storage.
1. Loosen the two cam locks on sides of
the upper handle and allow handle to
fold down to the rear.
fold down to the rear.
2. Loosen the two handle knobs on sides
of the lower handle, lift the sides of
the lower handle past the enges of the
handle brackets and pivot entire handle
as sem bly forward and allow it to rest on
mower.
the lower handle past the enges of the
handle brackets and pivot entire handle
as sem bly forward and allow it to rest on
mower.
• When setting up your handle from the
storage position, the lower han dle will
require manually locking into the mowing
position.
require manually locking into the mowing
position.
IMPORTANT: When folding the handle for
storage or transportation, be sure to fold
the handle as shown or you may damage
the control cables.
storage or transportation, be sure to fold
the handle as shown or you may damage
the control cables.
FOLD
FORWARD
FOR
STORAGE
FORWARD
FOR
STORAGE
MOWING
POSITION
Lower handle
Operator
presence
control bar
presence
control bar
Upper
handle
Cam lock
Handle knob