Tiger Mowers JD 5065M User Manual

Assembly Section 2-9

Attach the rear valve mounting bracket to the fender of the tractor by removing the 

two rear bolts on the left fender and the two rear bolts on the right fender.  See 
illustration below.  Drill the square holes in the fenders to accept 3/8” capscrews.  Use 
the hardware noted in the parts section to attach the valve mounting bracket to the 
tractor.

Next, attach the valve mounting plate to the mounting bracket.  Align the holes on 

the plate to the holes on the bracket.  Use the hardware shown in the parts section to 
attach the plate to the valve mounting bracket.  Finally, place the valve on the valve 
mounting plate as shown in the parts section.   Align the holes on the valve assembly 
to the holes on the plate.  Use the hardware provided to secure the valve to the plate.   
Refer to the parts section for the placement of the valve and the hardware used.   
Please handle the lift valve with care.  It is extremely heavy and contains small 
parts.