Fujitsu PRIMERGY RX300 S5 VFY:R3005SF030DE/B19 Data Sheet

6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600

USB ports

10 x USB 2.0 (3x front, 4x rear, 2x internal for backup devices plus 1x USB stick)

Graphics (15-pin)

2 x VGA (thereof 1x front optional)

Serial 1 (9-pin)

1 x serial RS-232-C,  usable for iRMC or system or shared

Serial 2 (9-pin)

1 x serial RS-232-C

LAN / Ethernet (RJ-45)

2  x Gbit/s Ethernet

Service LAN (RJ45)

1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s) 

Service LAN traffic can be switched to shared onboard Gbit LAN port

RAID Controller

Integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot, if 

at least 1 HDD is configured).

See under Components RAID controller

SATA Controller

ICH10B, with two SATA channels for DVD + backup

LAN Controller

Intel

®

 82575EB , 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), VT-c (I/O acceleration 

and VMDq), PXE boot via LAN from PXE server, iSCSI boot (also diskless) via onboard 

LAN

Remote Management Controller

Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. 

graphics controller), IPMI 2.0 compatible

Trusted Platform Module (TPM)

Infineon / separate module; TCG V1.2 compliant (option)

PCI-Express Gen2 x4

5 x low profile 

PCI-Express Gen2 x8

2 x low profile , both are notched x8 slot as well for x16 cards

Slot Notes

Two of four PCI-Express Gen2 x4 slots can be used as x8, if neighbour slot is empty.

One PCIe Gen2 x4 slot may be occupied with a modular RAID controller if configured.

Hard disk bays

12 x 

Hard disk bay configuration

6x 3.5-inch, for SAS / SATA or 8 or 12x 2.5-inch for SAS optional

Accessible drive bays

1 x 5.25/0.5-inch for CD-RW/DVD

1 x 3.5/0.5-inch for ServerView Local Service Panel  or Local Service Display 

1 x 3.5/1.6-inch for backup devices (occupies 2x 3.5-inch HDD for basic unit 6x 3.5-inch)

Notes accessible drives

All possible options described in relevant system configurator.

Number of fans

5

Fan configuration

Hot-plug

Operating buttons

On/off switch

NMI button

Reset button

Status LEDs

System status (amber / yellow)

Identification (blue)

Hard disks access (green)

Power (amber / green)

At system rear side:

System status (amber / yellow)

Identification (blue)

LAN connection (green)

LAN speed (green / yellow)

Service display

Optional:

ServerView Local Service Panel (LSP)

ServerView Local Service Display (LSD)