Kenmore 5 User Manual

MAINTENANCE
Reel Drive Belts

To replace the Reel Drive Belts. Reels 2 and 3.

Fig.34

• Remove the Safety Chain from the Stay Rod

and compress the Telescopic Arm with the
Compression Tool as shown in Fig.33.

• Remove the Front Jackshaft Couplers and

pull the belt through the gap between the
Jackshafts.
Install the new belt onto the sheaves. Fit the
Jackshaft Coupler.

• Carefully release the Compression Tool and re-

attach the Safety Chain.

To replace the Reel Drive Belts. Reels 6 and 7.

Fig.35

• With the Wings ‘down’, remove Shaft Cover.

• Remove the Socket Set Screws from the

‘outboard’ end of inner front PTO Shafts, and
slide the PTO Shafts off the Reel Drive Shaft.

• Remove the Safety Chain from the Stay Rod

and compress the Telescopic Arm as in Fig.33.

• Remove Belts. Fit new Belts. Carefully release

the Compression Tool and attach Safety Chain.
Refit PTO Shafts and Covers.

Fig.34

Fig.35
                            IMPORTANT
         Apply ‘Loctite 242’ to the PTO Shaft Setscrews.