Jacuzzi J - 480 User Manual

Page 87

button (3) to choose ONE or ALL. Press ENT button (9) to confirm 

selection.

If ONE COPY is selected: The record percent “DOWN LOAD xx%” 

• 

will display on the LCD (17). After copying is finished, the next track 

will automatically begin playback.

If ALL COPY is selected: “The number of total track --> the number of 

• 

recorded track” will display on LCD (17). After copying is finished, the 

unit will beep for about 3 seconds, then automatically begin playback 

of track #1.

note: In copying process, you can change to other modes. (USB and 

NAND modes could not be selected.) While in other modes, the screen 

will default to the downloading process after 3 seconds.

3.  

 

In NAND mode, press and hold SEL button (15) for about 2 seconds 

until “ONE DEL” displays on LCD (17). Use VOL up or down button 

(3) to choose ONE or ALL. Press ENT button (9) to confirm selection.

If ONE DEL is selected: Next track will begin playback after file 

• 

deletion has finished.

If ALL COPY is selected: “DELETING” will display on LCD, then “NO 

• 

FILE” will display after deletion process has finished. After that it 

would automatically switch to Radio mode.

4.  

To Search File In USB or NAND mode: Press AS/PS button (6) once 

• 

to enter track searching mode, then press VOL Up/Down button (3) 

to scroll through available tracks. At desired track, press ENT button 

(9) to confirm selection. Once track is selected, it will automatically 

begin to play.

To Search Folder in USB or NAND mode: Press AS/PS button (6) to 

• 

enter folder searching mode. Then press VOL Up/Down button (3) to 

scroll through available folders. At desired folder, press ENT button 

(9) to confirm selection. Then search your desired file as above 

method.

1.  

 

Open front panel (16) and plug an iPod into the iPod Docking Station 

(12) as shown. Refer to step 12 (page 84) for details. The iPod will 

begin to play automatically. Close front panel. The “iPod” symbol will 

display to indicate an iPod is connected.

•   To Play connected iPod: Press MODE button (4) to change to iPod 

mode. The iPod will play. The display will either show:

A.   The current track and play time or

B.   The iPod will resume or pick up the last song played prior to docking 

it. Please note after a few seconds the stereo display will show 

audio information from iPod.