Jacuzzi J - 465 User Manual

Page 52

A. 

1.  Press button A to activate the solid color mode. 

note: The default color and intensity will always be the last color and 

intensity used.
2.  Press again to turn off. 
3.  Press either the Left or Right button of the Quad Keypad to scroll 

through or select one of the 7 different colors (Figure C).

Press the Left button to move forward in the color sequence. (Blue-

• 

Cyan-Green-Yellow-Orange-Red-Purple-Blue).

Press the Right button to move backwards in the color sequence. (Blue-

• 

Purple-Red-Orange-Yellow-Green-Cyan-Blue).

4.  The intensity of the lights can be controlled  

in both the solid color or light rotation modes 

by using the Quad Keypad (Figure D).

Press the Up button to increase the intensity 

• 

in 25% increments.

Press the Down button to decrease the intensity in 

• 

25% increments.

note: The intensity range is from 25% to 100%, in increments of 25%. As 

the intensity is increased/decreased the bulb will darken/lighten to reflect 

the effect. Intensity defaults to the last setting used.

B. 

The lighting performance can be user  

enhanced by controlling the intensity 

and frequency effects as follows:

1.  Press button C to enter the Light 

Rotation Mode (Figure E). 

2.  To control the speed of the light  

rotation use the Quad Keypad by 

pressing the Right button to 

increase the speed of the light 

rotation speed from 1, 2, 3, 4, 5 or 6 (60, 33, 18, 10, 5 or 

3 seconds, respectively) or press the Left button to 

decrease the speed of the light rotation from 6, 5, 4, 3, 2 or 1 (3, 5, 

10, 18, 33 or 60 seconds, respectively). On the LCD display you will 

see a number from 1-6 to indicate the speed selection (Figure F). 

Blue

Cyan

Green

Yellow

Orange

Red

Purple

Figure C

25% 50% 75% 100%

Figure D

ROTATION

Brightness

Displays

Speed

Information

Figure E

Figure F

1  

2  

3  

4  

5       6

(60 sec)  (33 sec)  (18 sec)  (10 sec)   (5 sec)  (3 sec)