Jacuzzi J - 465 User Manual

Page 82

19.2  J-1000 audio system sound system Operation
1.  

 

Press power button (1) once to turn on 

stereo system. Press a second time to 

turn off.

2.  

 

Press VOL Up/Down button (3) to increase 

or decrease volume. Current volume setting 

is briefly displayed (0 to 45).

3.  

 

In Radio or AUX mode, press mute 

button (7) once to mute audio output 

(“MUTE” appears on display). To restore audio output, press button 

(7) a second time, or press Volume Up/Down button. In CDP, USB, 

NAND and iPod mode, press button (7) to pause playback. Press 

again to resume playback.

4.  

 

Press MODE button (4) to cycle through available program sources 

as follows: Radio --> CDP --> USB --> NAND --> IPOD --> AUX --> 

Radio. If a CD or iPod is unavailable, that source will not appear on 

the display (17).

5.  

 

Press EQ button (5) repeatedly until display reads “BASS”. Press 

VOL Up/Down button (3) to choose desired setting. A display of 

“BASS 0” indicates center, -1 to -7 indicates bass cut, and +1 to +7 

indicates bass boost. 

note: Unit returns to volume mode if volume control is not operated for 3 

seconds.

6.  

 

Press EQ button (5) repeatedly until display reads “TREBLE.” Press 

VOL Up/Down button (3) to choose desired setting. A display of 

“TREBLE 0” indicates center, -1 to -7 indicates treble cut, +1 to +7 

indicates treble boost. 

note: Unit returns to volume mode if volume control is not operated for 3 

seconds.

7.  

 

Press EQ button (5) repeatedly until display reads “BALANCE.” 

Press VOL Up/Down button (3) to choose desired setting. A display 

of “BALANCE R-L” indicates center, L01 to 15 indicates left balance, 

R01 to 15 indicates right balance. 

note: Unit returns to volume mode if volume control is not operated for 3 

seconds.