Jacuzzi J - 465 User Manual

Page 85

4.  

 

Press AS/PS button (6) once to enter scan mode. Each preset 

station in the current band will play for 5 seconds while the preset 

number is flashes on the display (17). At the desired station, press 

AS/PS button (6) a second time. 

5.  

 

Press and hold ENT/SH button (9) until display reads “SHIFT”. 

Repeatedly press TUN Up/Down button (2) to choose preset 1-6, 

then press ENT/SH button (9) to confirm selection.

19.4  J-1000 audio system CD Player Operation
1.  

 

Open front panel (16) by pressing firmly on release button (15) and 

lifting panel upward from bottom edge. Gently insert CD into slot (14) 

with label facing up. The CD will be drawn inside by the motorized 

mechanism. DO NOT FORCE! Close front panel by folding down, 

then press firmly on panel directly above release latch (15) until you 

hear an audible “click”. Keep front panel closed at all the times to 

prevent water intrusion, except when changing discs. CD playback 

will automatically begin after CD is loaded. A “S-CDP” icon on the 

display indicates that a disc is inside the mechanism.

To Play CD: Press the MODE button (4) to change to CD mode. 

• 

The CD will play. The display shows current track, play time, and 

animates a 3-D rotating disc during playback.

To Remove CD: Open the front panel and press CD eject button 

• 

(13). Remove CD from drive and close front panel as instructed in 

step 12 (page 84).

2.  

 

To advance to next track, press TUN Up button (2) once to increase 

track counter one track. When final CD track is reached, play will 

resume on track #1.

To fast forward through tracks: Press and hold TUN Up button (2) 

• 

until track counter displays desired track, then release button.

To rewind current track: Press and hold the TUN Down button (2) the 

• 

track will quickly rewind until you release the button.

note: It will go back to the beginning of the playing track when you press 

the Tune/Seek down button once, and it will go back to the previous track 

when you press the button once again.
3.  

Random Mode: Press SH button (9) to play the CD tracks in random 

• 

order. The left side of the display (17) reads “RDM” when random 

mode is enabled. Press a second time to deactivate.

Repeat Mode: Press BND button (8) to repeat current CD track. The 

• 

left side of the display reads “RPT” when repeat mode is enabled. 

Press a second time to deactivate.