Jacuzzi J - 230 User Manual

Page of 60
J-200 Series
4.1 
outdoor location
In selecting the ideal outdoor location for your spa, we suggest that you 
take into consideration:
The proximity to changing area and shelter (especially in colder 
• 
weather).
The pathway to and from your spa (this should be free of debris so 
• 
that dirt and leaves are not easily tracked into the spa).
The closeness to trees and shrubbery (remember that leaves and 
• 
birds could create extra work in keeping the spa clean).
A sheltered environment (less wind and weather exposure can result 
• 
in lowered operation and maintenance costs).
The overall enhancement of your environment. It is preferable not to 
• 
place the spa under an unguttered roof overhang since run-off water 
will shorten the life expectancy of the spa cover.
For spas that are to rest on balconies, roofs or other platforms not 
• 
specifically tied into main structural support, consult a professional 
Structural Engineer with experience in this type of application.
4.2 
Indoor location
For indoor installations many factors need to be considered before 
installing a spa indoors:
proper Foundation:
• 
 Consult a structural engineer when 
considering a foundation that will adequately support the spa 
the entire time it is in place. Proper support is critical especially 
if the spa is to rest on a second story or higher. For spas that are 
to rest on balconies, roofs or other platforms not specifically tied 
into the main structural support, you should consult a professional 
Structural Engineer with experience in this type of application.
proper Drainage:
• 
 It is extremely important to have in place 
measures to sufficiently handle excessive water spillage. Be 
sure the flooring in which the spa rests on has adequate drainage 
and can handle the entire contents of the spa. Be sure to make 
provisions for ceilings and other structures that may be below the 
spas installation. Areas around your spa can become wet or moist so 
all flooring and subsequent furniture, walls and adjacent structures 
should be able to withstand or resist water and moisture.
proper ventilation:
• 
 Proper ventilation should be discussed with 
an engineer or authority competent enough to understand the 
necessary provisions needed to vent moist or heated air and air 
associated with chemical odors outdoors. When the spa is in use 
considerable amounts of moisture will escape, potentially causing 
mold and mildew over time which can damage certain surfaces and/
or surroundings.
10