Jacuzzi J - 230 User Manual

A.  leD Display: Can 

display current water 
temperature (de-
fault display), water 
temperature set point, 
selected filtration/
heating mode, and 
error messages.

B.  Heat Indicator: Lit when heater is on.

C.  Jets 1 Button: Turns jets pump #1 on and off. Press once for low 

speed; press a second time for high speed; press a third time to turn 
pump off.

D.  Jets 2 Button: Turns high-speed jets pump #2 on and off. Press 

once to turn pump #2 on; press a second time to turn pump #2 off.

E.  light Button options:

With standard incandescent light: Turns underwater light on and off.

• 

With optional LED lighting system: Turns underwater light and top 

• 

rim accent lights on in one of three random modes or one of seven 

solid colors. Refer to section 10.4 (page 27) for details.

F.  warmer (

) Button: Increases water temperature set point.

G.  Cooler (

) Button: Decreases water temperature set point.

Temperature Adjustment: 65 to 104°F (18 to 40°C). Factory default 

• 

setting is 100°F (38°C). 

Standard light system: Incandescent light runs for 1 hour, then 

• 

automatically shut off for increased bulb life.

Optional LED light system: All LED lights run for 1 hour, then 

• 

automatically shuts off.

Jets 1/Jets 2 Button Operation: Jets run for 20 minutes when 

• 

activated, then turn off automatically to conserve energy. Simply 

press either jets button to continue operation for an additional 20 

minutes.

1

2