Jacuzzi ProTech LCD User Manual

Page 18

then repeatedly press the sensor pad to turn the light off or to select one of
6 constant colors illustrated below.

You must press the LIGHT sensor pad within 5 seconds between each “off”
or “color” step in the light sequence to prevent it from resetting.  Pressing
the sensor pad after 5 seconds restarts the sequence at “Random” mode.
This mode automatically changes the light color every 8 to 20 seconds.
Note: Any time the spa light is manually turned on, it will automatically turn
off after approximately 1 hour.  If you desire more light at this time, simply
turn the light back on.

The sensor pad labeled JETS 1 controls the 2-speed pump #1.
Pressing this sensor cycles pump #1 from off, to low speed, to
high speed, and back to off.

On two pump J-350, J-360, J-370 models, the sensor pad
labeled JETS 2 controls the high-speed pump #2.  Pressing this
sensor cycles pump #2 on and off.  

On the three pump J-380 model, this sensor pad controls both pump #2 and
pump #3 in the following sequence: 
A)   Press once to turn on pump #2 in high-speed;
B)   Press a second time to turn on pump #3 in high-speed;
C)   Press a third time to turn off pump 2;
D)   Press a fourth time to turn off pump #3.

Your Jacuzzi Premium spa is equipped to allow you to customize the massage
action you desire.  Each model incorporates a massage selector that allow you

Spa Light Sequence