Jacuzzi FR66 Leaflet

Page of 2
Majora® 6 Whirlpool Bath  
Model: H543, H544 
Majora® 6 Bath
Model: H545
Installation Notes
Refer to installation instructions included with fixture before beginning installation. 
Please confirm product availability and specifications before commencing with any 
installation work. 
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE 
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths. 
Ordering Information
Product Code:
H544    Majora® 6 Whirlpool Bath  
 
Right Hand
H543    Majora® 6 Whirlpool Bath 
 
Left Hand
H545    Majora® 6 Bath 
• Right and Left Hand Drain Location
• Accessories / Hardware:
 
Trip-Lever Drain Kit #X559
 
Rotary Drain Kit, 26” Cable #8730
 
HTC Jet Trim Kit: #D095
 
BMH Jet Trim Kit: #J869
• Trim Kit Finishes Available:
 
(827) – Chrome 
 
(898) – Brushed Chrome
 
(815) – Satin Nickel 
 
(829) – Bright Brass
 
(805) – Platinum 
 
(826) – Brushed Nickel
 
(849) – Oil Rubbed Bronze
Technical Specifications
Dimensions
72” L x 42” W x 19-3/4” H
(1829 mm) L x  (1067 mm) W x (502 mm) H
Drain/Overflow
A: 15-5/8” (397 mm) B: 10-1/2” (267 mm)  
Cutout
70” x 40”
Total Weight
H543, H544: 937 lb (425 kg) / 45 lb/sq. ft. (218 kg/m
2
)
H545: 913 lb (414 kg) / 44 lb/sq. ft. (212 kg/m
2
)
Operating Gallonage
70 U.S. Gal. (265 Liters)
Product Weight
H543, H544: 104 lb (47 kg)
H545: 80 lb (36 kg)
Skirt Mounting
Not Available
Electrical Specifications 
Models H543, H544 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP,  60 Hz.
RapidHeat™: 120 VAC, 15 AMP,  60 Hz.
Heater (Optional) 
Models H543, H544 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
42"
  72"
12" x 4"*
21"
2"
10-1/2"
Motor
12" H x 18" 
L
Service Access
Opt.  Service Access
4-3/8"
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
END VIEW
H
W
SIDE VIEW
L
2"
#FR66  12/06
DRAIN/OVERFLOW
A
B
Product Shown: Majora® 6 Whirlpool Bath Left Hand  Model: H543
* Measurements  inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.