Jacuzzi BK30 Leaflet
Allusion
®
6636
SAlon™ SpA BAth
technical Specifications
DimenSionS
66” L x 36” W x 26” H
(1829 mm) L x (914 mm) W x (660 mm) H
66” L x 36” W x 26” H
(1829 mm) L x (914 mm) W x (660 mm) H
DrAin/overflow
A: 17-3/8” (441 mm) B: 11-15/16” (210 mm)
A: 17-3/8” (441 mm) B: 11-15/16” (210 mm)
Cutout
Template Provided Part Number: BY20000
Template Provided Part Number: BY20000
totAl weight
881 lb (400 kg) / 53 lb/sq. ft. (261 kg/m
881 lb (400 kg) / 53 lb/sq. ft. (261 kg/m
2
)
operAting gAllonAge
65 U.S. Gal. (246 Liters)
Min. 55 U.S. Gal. (208 Liters)
Max. 75 U.S. Gal. (284 Liters)
65 U.S. Gal. (246 Liters)
Min. 55 U.S. Gal. (208 Liters)
Max. 75 U.S. Gal. (284 Liters)
proDuCt weight
200 lb (91 kg)
200 lb (91 kg)
Skirt mounting
Not Available
Not Available
eleCtriCAl SpeCifiCAtionS
All require a dedicated gfCi protected separate circuit(s).
Blower: 120VAC, 20AMP, 60 Hz. .
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
Blower: 120VAC, 20AMP, 60 Hz. .
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
heAter (StAnDArD)
RapidHeat™: P/N BN60000
RapidHeat™: P/N BN60000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStAllAtion noteS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
TO CHANGE WITHOUT NOTICE.
product Shown: Allusion
®
6636 Salon
™
Spa
right hand (Bk30) Shown.
* Measurements inside unit represent cutout in
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
#FR08000 10/07
Bk30
Allusion
®
6636 Salon
™
Spa Right Hand with
Chromatherapy lighting
Bt80
Allusion
®
6636 Salon
™
Spa Right Hand with
Illumatherapy™ jet lighting
• Left and Right Drain Location
• Accessories / Hardware:
4 X HTC Jet Rings Kit: #D095
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Heater
5" x 5"*
8-1/2"
12" H x 18" L
Service Access
Service Access
12" H x 18"
L
Service Access
Opt. Service
Access
Access
(Blower)
(Motor)
END VIEW
H
W
SIDE VIEW
L
4"
2"
ALLUSION SIDE END
(Heater)
MAX 1/2"**
DRAIN/OVERFLOW
A
B
** See Install manual for installations instructions.