Generac QT06024ANAX User Manual

SPECIFICATIONS

Type......................................................................Synchronous

Rotor Insulation .............................................................Class H

Stator Insulation ............................................................Class H

Telephone Interference Factor (TIF) .................................. < 50

Alternator Output Leads 3-phase ..................................... 4-wire

Bearings ..................................................................Sealed Ball

Coupling ................................................................Flexible Disc

Load Capacity (Standby Rating) .....................................60kW*

*

  NOTE: Generator rating and performance in accordance with ISO8528-5, BS5514, SAE 

J1349, ISO3046 and DIN 6271 Standards. KW rating is based on LPG fuel and may derate 
with natural gas.

Excitation System ............................................................Direct

Generator Output Voltage/kW - 60 Hz  kW 

Amp 

CB Size

  120/240V, 1-phase, 1.0 pf 

60 

250 

300

  120/208V, 3-phase, 0.8 pf 

60 

208 

250

  120/240V, 3-phase, 0.8 pf 

60 

180 

200

  277/480V, 3-phase, 0.8 pf 

60 

90 

100

 Generator Locked Rotor KVA Available @ Voltage Dip of 35%

  Single-phase or 208, 3-phase (60kW) ...................... 120 KVA

  480V, 3-phase (60kW) .............................................. 141 KVA

Make ........................................................................... Generac

Model .............................................................................In Line

Cylinders and Arrangement .....................................................4

Displacement ............................................................... 2.4  Liter

Bore..............................................................................3.41 in.

Stroke ...........................................................................3.94  in.

Compression Ratio....................................................... 9.5-to-1

Air Intake System ........................... Turbo Charged/After Cooled

Valve Seats ................................................................ Hardened

Lifter Type .................................................................. Hydraulic

Spark Plug Gap ........................................0.17mm (0.028 inch)

Rated Synchronous RPM .......................................60 Hz, 3600

Exhaust Flow at Rated Output 60 Hz (60kW) ................494 cfm

Exhaust Temp. at Rated Output (60kW) .........................1050° F

Flow at rated power, 60 Hz (60kW) ..............................180 cfm

Type...........................................................................Electronic

Frequency Regulation .............................................Isochronous

Steady State Regulation ..............................................± 0.25%

Type of Oil Pump ...............................................................Gear

Oil Filter ......................................... Full Flow Spin-on, Cartridge

Crankcase Oil Capacity ....5.25 U.S. qts. (including filter capacity)

Type............................................. Pressurized Closed Recovery

Water Pump ............................................................. Belt Driven

Fan Speed ..................................................................2050 rpm

Fan Diameter ..............................................................22 inches

Fan Mode ......................................................................... Puller

Air Flow (inlet air including alternator and

  combustion air) ................................................. 3280 ft

3

/min.

Coolant Capacity ................................................. (2.5 U.S. gal.)

Heat Rejection to Coolant (60kW) .......................270,000 Btu/h

Maximum Operating Air Temp. on Radiator ......... 60° C (150° F)

Maximum Ambient Temperature ......................... 50° C (140° F)

Type of Fuel ....................................Natural Gas, Propane Vapor

Carburetor............................................................... Down Draft

Secondary Fuel Regulator............................................ Standard

Fuel Shut-off Solenoid ................................................. Standard

Operating Fuel Pressure  ................. 5 in. - 14 in. Water Column

60kW 123/49.3 267/101  483/183  672/255  862/327

Battery Charge Alternator ......................................12V, 30 Amp

Static Battery Charger ..................................................2.5 Amp

Recommended Battery .................................Group 26, 525CCA

System Voltage ............................................................ 12 Volts

Type...........................................................................Electronic

Sensing ................................................................ Single-phase

Regulation ........................................................................±  1%

Features ......................................... Adjustable Voltage and Gain

Temperature Deration

  3% for every 10° C above °C (60kW) ..................................25

  1.65% for every 10° above °F (60kW) .................................77

Altitude Deration

  1% for every 100 m above m (60kW) ...............................915

  3% for every 1000 ft. above ft. (60kW) ...........................3000

GenSpec088  Rev

. A  05/10

Specifications