Acesonic DGX-210 User Manual

16

Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you suspect that something is wrong
with the unit, check the list below, for sometimes the troubles lie within another component. Remember to try
inspecting other components and electrical appliances in use. If the trouble cannot be rectified even after exercising
the steps listed below, call our Acesonic service center +1-626-820-0670 to inquire about repairs.

Resetting the unit might solve more than Press the SETUP button on the remote controller and then

90% of all problems, try steps below

choose SYSTEM SETUP->DEFAULT->RESTORE

then reset the unit.

then press ENTRY button. Your player is now set at it's

original factory settings.

1. The disc automatically ejects back out  

* The disc is dirty or warped

    even when the disc tray is closed.

* The disc is not placed properly on the disc table
* Region No. does not conform with the unit

2. Cannot execute playback.

* Condensation has formed inside the player

3. Picture disturbance during playback.

* This player is compatible with Macro-Vision System
  copy guard. Some discs include a copy prevention
  signal, and when this type of disc is played back, 
  stripes etc., may appear on some sections of the

  picture depending on the TV. (This is not a malfunction.)

4. When recorded on a VCR

* This player is compatible with analog copy protect 

    there is disturbance in the 

  technology copy guard. Some discs include a copy 

    playback picture.

  prevention signal and the copy guard system will
  prevent proper playback.

5. When HAND icon appears on screen.

* The selected function does not operate for that disc.

6. Video playback stops and the

* First stop the disc, then start playback again. 

    operation button can not be used.

7. Remote is not functioning.

* The remote control is too far from the player, or the
  angle with the remote sensor is too sharp.
 * The batteries are exhausted (dead).

 * The batteries are positioned incorrectly in the remote.

 * There is an object between the remote sensor or player.

8. Improper operation of TV

* Some TVs that have wireless remote control functions

    set, etc., occurs

  may not operate properly with this remote control.

9. No audio or distorted sound.

* Digital signal is prohibited for some discs.

* The connection plugs are not inserted all the way into the 

  terminals or are not connected.
* The connection plug or terminal is dirty.
* Audio cable connection is incorrect.
* Connection is made to the stereo amplifier's
  PHONO input terminal.
* The pause mode is engaged.
* Stereo amplifier operation is wrong.
*Check input (CD, AUX etc.) selector.

10. Noticeable difference in 

* Although you may notice a difference in volume

     DVD and CD volume.

  between CDs and DVDs, this is the result of a 
  difference in disc recording methods.

16

*Caution 

Abnormal activity of the unit can be caused by static electricity, or other external interference.

To restore normal operation, unplug the AC power cord and plug it in again.