Linear AE-1 Leaflet
0001
0001
INS
T
R,INST
,AE
1
ME
CH/E
LE
C
Linear P/N: 21
307
1 B
Mate
rial: 2
0
Lb
. Me
ad Bo
nd
Si
ze:
8.50
0 x 11
.000
"
Ink: B
lack
Scal
e
: 1-1
Front
Si
d
e
1
of 2
AE-1
Telephone Entry Control Console
Mechanical & Electrical
Installation Instructions
Installation Instructions
(760) 438-7000
•
FAX (760) 438-7043
USA & Canada (800) 421-1587 & (800) 392-0123
Toll Free FAX (800) 468-1340
www.linearcorp.com
INTRODUCTION
The Model AE-1 Telephone Entry Control Console is designed for use as a primary
access control device for gated communities, parking garages, office buildings,
apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.
access control device for gated communities, parking garages, office buildings,
apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.
This unit is a fusion of Linear’s full-featured Model AM/II Access Control System and
the Model AE-1 Telephone Entry Module. Housed in a locked, rugged stainless steel
enclosure, the AE-1 features a 12-key telephone style keypad, a backlit two-line
directory display, and a built-in microphone and speaker.
the Model AE-1 Telephone Entry Module. Housed in a locked, rugged stainless steel
enclosure, the AE-1 features a 12-key telephone style keypad, a backlit two-line
directory display, and a built-in microphone and speaker.
All of the outstanding AM/II access control system functions are available with the AE-1 in
addition to hands-free, full duplex telephone communications with tenants or authorized
personnel for granting access. Entry codes can also be typed directly on the keypad.
addition to hands-free, full duplex telephone communications with tenants or authorized
personnel for granting access. Entry codes can also be typed directly on the keypad.
In a typical installation, the unit’s memory would be programmed with each tenant’s
name and directory code number. A visitor would use the
name and directory code number. A visitor would use the
*
or # key on the AE-1 to view
the directory names and code number for the desired party. Upon entering the directory
number, the AE-1 will automatically dial the tenant’s telephone number and establish
two-way voice communication between the visitor and the tenant. The tenant will then
have the option to grant access to the guest by pressing a digit on their telephone.
number, the AE-1 will automatically dial the tenant’s telephone number and establish
two-way voice communication between the visitor and the tenant. The tenant will then
have the option to grant access to the guest by pressing a digit on their telephone.
In addition to the telephone entry, the AE-1 can grant access using various remote
devices that are commonly used with the AM/II. These devices include wireless
transmitters, proximity receivers, swipe card readers and remote keypads.
devices that are commonly used with the AM/II. These devices include wireless
transmitters, proximity receivers, swipe card readers and remote keypads.
The output relays can be programmed to control electric door strikes, door & gate
operators, barrier gates. CCTV cameras can also be triggered by the output relays to
monitor the entry areas.
operators, barrier gates. CCTV cameras can also be triggered by the output relays to
monitor the entry areas.
All of the programming functions of the AE-1 can be performed directly through the
unit’s keypad. An optional telephone modem can be installed for easy remote
programming with a personal computer.
unit’s keypad. An optional telephone modem can be installed for easy remote
programming with a personal computer.
The AE-1 cabinet has provisions for installing a postal lock for keyed mail carrier access.
The postal lock can be programmed to activate any of the four output relays.
The postal lock can be programmed to activate any of the four output relays.
1. SYSTEM COMPONENT LOCATIONS
2. AE-1 COMPONENT LOCATIONS
3. DETERMINE MOUNTING LOCATION
4. MOUNT CABINET
AM/II ACCESS
CONTROL SYSTEM
CONTROL SYSTEM
MODEM
(OPTIONAL)
(OPTIONAL)
SPEAKER
POSTAL LOCK
LOCATION
(LOCK OPTIONAL)
LOCATION
(LOCK OPTIONAL)
POSTAL LOCK
SWITCH
SWITCH
AE-1 TELEPHONE
ENTRY MODULE
ENTRY MODULE
MICROPHONE
(HIDDEN)
(HIDDEN)
MODULAR
TELEPHONE
JACK (HIDDEN)
TELEPHONE
JACK (HIDDEN)
TELEPHONE
LINE TERMINALS
LINE TERMINALS
HYBRID LEVEL
ADJUSTMENT
(FACTORY SET
DO NOT ADJUST)
ADJUSTMENT
(FACTORY SET
DO NOT ADJUST)
SPEAKER
VOLUME
ADJUSTMENT
VOLUME
ADJUSTMENT
AE-1 TO AM/II
INTERCONNECT
CABLE
INTERCONNECT
CABLE
ON-LINE INDICATOR
(LIGHTS WHEN PHONE
LINE IS ACTIVE)
(LIGHTS WHEN PHONE
LINE IS ACTIVE)
DISPLAY
CONTRAST
ADJUSTMENT
CONTRAST
ADJUSTMENT
BUSY INDICATOR
(LIGHTS WHEN AE-1 IS
COMMUNICATING OR WHEN
PHONE LINE IS DISCONNECTED)
(LIGHTS WHEN AE-1 IS
COMMUNICATING OR WHEN
PHONE LINE IS DISCONNECTED)
SPEAKER
CONNECTOR
CONNECTOR
TEST JUMPER
(REMOVE TO
HEAR UNIT DIAL)
(REMOVE TO
HEAR UNIT DIAL)
MICROPHONE
& POSTAL KEY
SWITCH TERMINALS
& POSTAL KEY
SWITCH TERMINALS
THE AE-1 SHOULD BE MOUNTED IN A WELL LIT LOCATION NEAR THE
CONTROLLED OPENING. WIRING ACCESS FOR POWER, TELEPHONE,
EARTH GROUND, CONTROL OUTPUT AND ANTENNA CO-AX MUST BE
AVAILABLE BEHIND THE MOUNTING LOCATION.
CONTROLLED OPENING. WIRING ACCESS FOR POWER, TELEPHONE,
EARTH GROUND, CONTROL OUTPUT AND ANTENNA CO-AX MUST BE
AVAILABLE BEHIND THE MOUNTING LOCATION.
AE-1
TELEPHONE
ENTRY SYSTEM
TELEPHONE
ENTRY SYSTEM
CONTROLLED
ENTRY DOOR
ENTRY DOOR
AREA
LIGHTING
LIGHTING
5 3/8"
5 3/8"
9 3/8"
5 3/8"
5 3/8"
MOUNT CABINET WITH
SUITABLE HARDWARE FOR
MOUNTING SURFACE.
SUITABLE HARDWARE FOR
MOUNTING SURFACE.
USE TOGGLE BOLTS FOR
STUCCO WALL, WEDGE
ANCHORS OR EXPANSION
BOLTS FOR CONCRETE
WALL, LAG SCREWS FOR
WOOD WALL.
STUCCO WALL, WEDGE
ANCHORS OR EXPANSION
BOLTS FOR CONCRETE
WALL, LAG SCREWS FOR
WOOD WALL.
MOUNTING
LOCATION
LOCATION