Manualsbrain.com
  1. Manuals
  2. Brands
  3. American Dj
  4. DJ Scan/RG
  5. User Manual

American Dj DJ Scan/RG User Manual

Download
Page of 8
Due to fog residue, smoke, and dust, cleaning the internal and external 
optical lenses must be carried out periodically to optimize light output. 
 
1. 
 
Use normal glass cleaner and a soft cloth to wipe down the outside 
     
casing.
2. 
 
Use a brush to wipe down the fan grill.
3. 
 
Clean the external optics with glass cleaner and a soft cloth every 
   
  
20 
 days. Situation may very. If used heavily in clubs with lots of 
   
  
fog, cleaning may be required more often.
4. 
 
Clean the internal optics with glass cleaner and a soft cloth every 
     
30-60 
days.
5.
 
Always
 be
 sure
 to
 dry
 all
 parts
 completely
 before
 plugging
 the
 
     
unit in.
Cleaning frequency depends on the environment in which the fixture 
operates (i.e. smoke, fog residue, dust, dew).
©
American DJ Supply
®
  -  www
.americandj.com  - DJ Scan/RG™ Instruction Manual Page 10
©
American DJ Supply
®
  -  www
.americandj.com  - DJ Scan/RG™ Instruction Manual Page 9
  DJ Scan/RG™  
 
 
 
 
     Cleaning
  DJ Scan/RG™  
 
 
      Lamp Replacement
Lamp
 Replacement:
  
Caution!
 Never
 open
 the
 unit
 when
 in
 use.
  
Always
 disconnect
 the
 main
 power
 before
 attempting
 to
 replace
 the
 
lamp. 
1. 
 
Be
 sure
 to
 follow
 the
 proper
 procedures
 when
 handling
 halogen
 
     
bulbs.
2.
 
Lamp replacement has been made simple by incorporating the use 
     
of a removable lamp tray and thumb screws.
3.  Loosen the thumb screw on rear cover
.
4.  Remove the tray.
5.  Remove and replace the bulb.
6.  Reassemble.
Remember to always replace with the exact same type lamp and 
fuse, unless otherwise specified 
by an authorized 
American DJ 
service technician. 
The DJ Scan/RG™ may be controlled by a wide range of controllers; 
ie. Show Designer™, DMX Operator
,™
 Scene Setter™ or by the DJ 
MINI/C basic controller
.
MINI/C featur
es:
  DJ Scan/RG™  
 
 
 
  Optional Remote
The MINI/C controller may be 
purchased separately allowing you to 
control the main unit, and any others connected to it, while it is in stand 
alone mode. 
Y
ou can set the unit to blackout. If you have more than 
one unit, make sure the remote control is plugged into the first unit in 
the daisy chain. 
The remote control will not have any ef
fect if the unit 
is in DMX mode. When the unit is in blackout mode, the light will come 
on next to the blackout button.  
30 ft. cable
Stand by (Black out)