Tektronix AWG5000 Series User Manual

Rear Panel

AWG5000 Series Quick Start User Manual

1. 10 MHz Reference Output

Output connector for 10 MHz reference clock signal
Connector Type: BNC

2. Reference Clock Input

Input connector for external reference clock
Connector Type: BNC

3. Oscillator Output

Output connector for internal oscillator
Connector Type: BNC

4. External Clock Input

Input connector for oscillator input
Connector Type: BNC

5. Add Input

Add external signal to the output signal of arbitrary waveform generator
Connector Type: BNC

6. GPIB

Use the GPIB connector to connect the instrument to a GPIB controller for GPIB opera-
tion.

7. LAN

Use the RJ-45 connector to connect the instrument to a network.

8. Parallel Port

Use the parallel port (Centronics) to connect a printer or other device.

9. USB

Use the USB connectors to connect a USB mouse, keyboard, or other USB device to the 
instrument.

10. Video

Use the Video port to connect a monitor for extended desktop operation.

11. COM1

Use the COM1 serial port to connect to other devices through the serial port.

12. PS-2 connector

Use the PS-2 connectors to connect a PS-2 keyboard or mouse to the instrument.

13. Removable HDD

Removable hard disk drive to secure data

14. Digital Data Out

Use these connectors to output digital data. To enable digital data output, option 03 must 
be installed in the AWG5002 or AWG5012.
Connector Type: SMB

15. This connector is not supported.

To avoid electric shock
the power cord protective
grounding conductor
must be connected to
ground. No operator
serviceable components
inside. Do not remove
covers. Refer servicing
to qualified personnel. 

To enable or disable the LAN, see 

enabling your LAN and connecting to a network 

in your manual.

Ch 1 Digital Data Out

Ch 2 Digital Data Out

0.8 V p-p

50

1 V Max

50

3 V Max

50