Tektronix AWG5000 Series User Manual
Using the Edit Menu
42
AWG5000 Series Quick Start User Manual
Creating a Standard Waveform
You can create a new waveform using the standard waveform dialog box.
1. Select Edit > Standard Waveform... to
open the Standard Waveform dialog
box.
box.
2. Use Function to select a waveform
type. You can select a waveform from
Sine, Triangle, Square, Ramp, Gaus-
sian Noise, and DC.
Sine, Triangle, Square, Ramp, Gaus-
sian Noise, and DC.
3. Use Timing to set parameters for
Frequency, Waveform Length, and
Cycle.
Cycle.
4. Select Auto or No Change in Sampling
Rate.
■
Auto
Sampling rate and waveform length
are automatically set to appropriate
values.
Sampling rate and waveform length
are automatically set to appropriate
values.
■
No Change
Sampling rate is not changed. You
can select any two parameters from
frequency, waveform length, and
cycle. The remaining parameter will
be calculated automatically.
Sampling rate is not changed. You
can select any two parameters from
frequency, waveform length, and
cycle. The remaining parameter will
be calculated automatically.
5. A waveform is displayed on the Preview
screen.
1
5
2
4
3