John Deere AC-G7510H User Manual

Operator’s Manual  

29

SHORT TERM (1-6 months):
1. Add gasoline conditioner and stabilizer at the specified 

concentration.

2. Run the unit for two (2) minutes to ensure the mixed   

fuel is in the entire fuel system. Close the fuel valve   

and run the unit until it stops.

3. Remove the spark plug, pour 1-2 teaspoons (5-10cc) of 

engine oil into the cylinder, slowly pull the starter handle 

2 or 3 times, reinstall the spark plug and tighten  

 

securely.

4. Clean the exterior surface of the generator and apply  

a rust inhibitor.

5. Store the generator in a dry, well ventilated place.

LONG TERM (More than 6 months):
1. Add gasoline conditioner and stabilizer at the specified 

concentration.

2. Run the generator until the fuel tank and carburetor    

are dry. As the engine is beginning to die, move the    

choke lever to the choke position.

NOTE: Turn off the idle control to decrease the run time.
3. Remove the spark plug, pour 1-2 teaspoons (5-10cc) of 

engine oil into the cylinder, slowly pull the starter handle 

2 or 3 times, reinstall the spark plug and tighten  

 

securely.

4. Clean the exterior surface of the generator and apply  

a rust inhibitor.

5. Store the generator in a dry, well ventilated place.